8 Comments

  1. Skycable—ang bulok ng service nyo. After more than 10yrs of being a loyal subscriber to skycable instead of improving your service it’s getting worse.simpleng ulan LNG and hangin wla na kagad signal. Grrr..I’m a tv addict and today aug27th it’s a holiday I’m planning to watch tv the whole day but I think holiday din yta ang skycable today!!!

  2. Putang inang sky cable yan!!! Lagi nlng wlang signal! Dame pang surcharge kasi late mgpadala ng bill dame pang hidden charges! Bulok kyo sky cable. Filipino people, lipat tayo sa cignal cable. HD pa. Sky cable wlang kuwenta. Mahal pa.

  3. Skycable Digibox Configuration and Troubleshooting

    Do it your self: Watch the Video how to Configuration of skycable Digibox sundan na lang yung Instructions sa Video:

    http://www.youtube.com/watch?v=yQLPQwtHY9E

    http://www.skycable.com/2010/sep/digiexpert.html

    Troubleshooting Guide

    Common Problem of Digibox:

    E04 Please insert smart card
    E05 Unknown smart card
    E06 Smart card failure

    Try any of the following:

    Pull-out and re-insert the smart card
    Wipe the microchip of the card with a dry fabric
    Gently move the card in and out for several times
    Slightly scratch the microchip with pencil eraser
    Reset your digital box by turning it off and pulling out the plug

    E16 Service is currently scrambled

    Try either of the following:

    Pull-out and re-insert the card

    If there’s a Music Note Symbol on your TV screen, just press the Music Note button on your remote control below the EPG button.

    E48 No signal
    E52 Searching for signal

    Try either of the following:

    Check and secure the connections of your digital box.
    Reset your digital box by turning it off and pulling out the plug.

    E50 No service available

    Try either of the following:

    Check and secure the connections of your digital box.
    Re-scan/Re-program your digital box by doing the following:

    For Skycable Subscriber only using Digibox if your Digibox did not receive any signal pls read the instructions how to configure.

    E50 No service available

    Try either of the following:
    Check and secure the connections of your digital box.
    Re-scan/Re-program your digital box by doing the following:

    This Guide How to Configuration of your Digibox:
    – Step 1 – Press “Menu” button.
    – Step 2 – Move to ” Installation ” using Ch+ or Ch- then press “OK”
    – Step 3 – Press four Zero’s ( 0000/Default password )
    – Step 4 – Move to “Restore Default”
    – Step 5 – Press OK button twice (2X)
    – Step 6 – Move to “Manual Install/Manual Scan” then press “OK”
    – Step 7 – Set frequency to “447/633”
    – Step 8 – Check the Signal and Quality
    – Step 9 – Move to “Search Mode” and set it to “NIT”
    – Step 10 – Move to “Start Search”
    – Step 11 – Press “OK” (Scanning / Searching will start)
    – Step 12 – Press “OK”
    – Step 13 – Press Menu 3x or press Exit once the scanning is complete
    – Step 14 – Setting is now complete

  4. Text mo ako if need nyo HELP regarding Sky Cable Digiboxes Problem, all Models. Isa ako sa ngmmanage ng REPAIR wether its software or Hardware issue. 09177829944.

Leave a Reply

Your email address will not be published. Required fields are marked *